Instructions

1. Clean the Molding and Paneling. Begin by making sure the paneling is clean. ...
2. Fill and Sand the Wood. Apply wood putty with a putty knife to fill any holes or cracks and allow to dry. ...
3. Caulk Around the Trim. ...
4. Prime the Wood. ...
5. Paint the Paneling. ...
6. Paint the Trim.

Can you paint directly over wood paneling?

When painting for wood paneling, choose either a stain-blocking latex primer or an oil-based primer. Apply a thin coat of primer with a roller. Use a brush to fill in any grooves. Allow the primer to dry a full 24 hours before painting over it.

What is the best type of paint to use on wood paneling?

The best type of paint to use on paneling is interior latex paint. These paints last longer and are more durable, so they shouldn't crack or chip over time. Latex paint is also water-based, which means that you can clean surfaces painted with latex paint by just using water.

Can you paint over paneling without sanding?

Can You Paint Paneling Without Sanding? Yes, you can paint paneling without sanding it first. The trick is to clean the surface with soap and water to remove any dust and loose dirt, then apply a de-glosser to ensure the primer and paint adhere easily.

Do I need to prime paneling before painting?

Yes. You need to prime your wood paneling before painting it. I don't usually recommend using primer when painting walls.

How do you paint over paneling and make it look good?

1. STEP 1: Clean the wall paneling with diluted TSP. ...
2. STEP 2: Lightly sand the wood paneling. ...
3. STEP 3: Protect the floor from paint splatter using drop cloths and painter's tape. ...
4. STEP 4: Apply two thin coats of stain-blocking primer. ...
5. STEP 5: Apply at least two thin coats of paint.

Which kilz to use on paneling?

KILZ 2 All-Purpose Interior/Exterior Primer is a foolproof option, especially for wood panels. This multi-surface primer can be used almost anywhere to conceal previous colours and block stains. It's very adhesive, has a low odour, and is mildew resistant.

How do you make wood paneling look modern?

1. Paint the wood paneling. Photo by Tad Davis Photography. ...
2. Whitewash the wood panels. Photo by Blakes London. ...
3. Turn the wood panels into regular walls. Photo by Cary Bernstein Architect. ...
4. Hide the wood paneling with shelves or curtains. Photo by W I N B E R G Interior + Architectural design. ...
5. Embrace the wood in a new color.

Can I use Kilz on paneling?

Offering excellent adhesion and durability, KILZ Original Interior | Exterior can be used on wood, drywall, plaster, stucco, brick, masonry, paneling and more.

How do you paint paneling with grooves?

Just follow these directions:

1. Sand the paneling lightly to dull the gloss.
2. Wipe any sanding dust off with a damp cloth.
3. Fill in the paneling grooves with joint compound.
4. Allow the joint compound to dry.
5. Apply additional coats of joint compound, if needed.

Can you paint cheap paneling?

Latex paints are durable and easy to use, making them an excellent choice for covering up old '70s paneling. We also recommend applying a satin finish to make the paint long-lasting and easy to clean. Depending on the paint color you choose, you may have to apply more than one coat to achieve full coverage.

Can you spray paint wood paneling?

An airless sprayer works well for paneling, which can be rented from a paint store. Spray painting with an airless sprayer does take a little practice and technique. If you don't want to use a sprayer, you can always paint the surface by hand.

Is wood paneling coming back?

But now wood paneling is back. People are finding clever ways to use it in a variety of modern styles. With some sleek geometry, creative stylings and light colors, wood paneling fits well into the updated, modern space.

How do you cover up old paneling?

The 4 Best Ways to Cover Up Fake Wood Paneling

1. Spackle and Paint. ...
2. The Tools You'll Need.
3. Clean the Panels. ...
4. Cover the Grooves With Spackle. ...
5. Sand It Down. ...
6. Primer and Paint. ...
7. Shellac-Based Primer and Paint. ...
8. Caulk and Wallpaper.

Which primer is better Kilz or Zinsser?

Consistency and Bleed-Through – Zinsser 123 primer vs kilz

Both products offer amazing coverage, but Zinsser is the winner as it's able to cover much better. Meanwhile, Kilz allows some bleed-through, depending on the surface. You may need to apply a thicker coat for the product to cover better.

Can you paint over laminate wood paneling?

Painting laminate wood paneling isn't much different from painting any other wall surface. The trick is to use a process that helps the paint adhere to the slick surface of the laminate. Repainting can breathe new life into a room, taking it from a dated, dark space into a modern one in no time at all.

How do I whitewash wood paneling?

Whitewash the Panels

Dilute white latex paint with water, and oil-based paint with turpentine. Use a 2 to 1 ratio of paint to water for thicker coverage, and reverse the ratio for a thinner application. Brush on your paint and immediately wipe it down until you get the desired colour and look.

How do you brighten a paneled room?

Sheers are ideal for brightening a room with dark paneling – opt for cream or ivory sheers that will give the room a fresh, crisp feel. If you're worried about privacy, pair the sheers with shades or blinds and only lower them when necessary. Artificial light can also help balance the dark look of the paneling.

What is the best primer to use on wood paneling?

Prime paneling with a latex, stain-blocking primer. For even coverage, we recommend having your primer tinted with colorant similar to the finished paint.

How do you hide paneling seams before painting?

If you plan on covering paneling with fresh drywall, you can stick mesh drywall tape over the seams to hide them. Spread joint compound over the tape before painting. Repeatedly painting over paneling won't cover the seams. They have to be filled in first or have paint underneath them to effectively stay hidden.

How do you paint over fake wood?

The 2 Best Ways to Paint Laminate Furniture ~ Method #1

1. Clean the Surface. This dresser was dusty so all that was needed to clean it was a soft cloth dampened with warm water. ...
2. Lightly Sand the Entire Piece. Yes, SAND! ...
3. Prime. I used B.I.N shellac-based primer. ...
4. Paint. ...
5. Protect with a Sealer/Topcoat.

How do you fill gaps in wood paneling?

Fill the cracks in your paneling using a wood filler compound instead of caulk. Use a putty knife to apply the wood filler to the walls. Smooth it out as much as you can and allow the putty to dry completely. Sand the putty to smooth it out and remove any excess.

How do you spray paint paneling?

Apply the Top Coat

Once dry, sand lightly just to dull it a bit and vacuum the loose material. Spray a thin and even top coat on the paneling. Allow the paint to dry thoroughly, then remove the masking and enjoy your beautiful new walls.

What is usually behind wood paneling?

Confirm that there is drywall under the wood paneling. Although you might think there is drywall beneath your wood paneling, you will need to make sure. Carefully remove a piece of molding or trim, or a light switch cover. One of these options will usually allow you to see what is behind the paneling.